KN 53

Bendix/King - NAV
KN 53
KN 53


Part Number :
All prices are exclusive of VAT
Select part number to view pricing and availability.
Price Condition Delivery Action
2500.00 € NEW In stock
S.E.A.M.Repair Capabilities : Yes
Price Condition Delivery Action
1500.00 € OH OUTRIGHT In stock
850.00 € OH EXCHANGE In stock
375.00 € SERVICE TEST EASA/FAA DUAL RELEASE On request
S.E.A.M.Repair Capabilities : Yes
Price Condition Delivery Action
950.00 € OH OUTRIGHT In stock
800.00 € OH EXCHANGE On request
295.00 € SERVICE TEST EASA/FAA DUAL RELEASE On request
S.E.A.M.Repair Capabilities : Yes
Price Condition Delivery Action
1150.00 € OH OUTRIGHT In stock
S.E.A.M.Repair Capabilities : Yes
Price Condition Delivery Action
375.00 € SERVICE TEST EASA/FAA DUAL RELEASE On request
S.E.A.M.Repair Capabilities : Yes
Features
 
  • 1.3" high flat-pack, NAV unit
  • 200-channel navigation receiver
  • Built-in 40 channel Glideslope receiver available as option (see table below)
  • Features simultaneous gas discharge display of both active and standby frequencies
  • Flip-flop frequency transfer button
  • Electrically Alterable Read Only Memory (EAROM) provides non-volatile storage of two frequencies
  • Used with either KI-203 or KI-208 VOR/LOC indicators and KI-204 or KI-209 VOR/LOC/GS converter/indicators
  • Will operate an HSI such as KI-525A (of KCS-55A System) with a remote KN-72 VOR/LOC converter
  • Output provided for automatic channeling of remote DME systems
  • Composite VOR output signal provided to operate KI-229 RMI
  • All solid-state system employs digital frequency synthesizer for NAV frequency control
  • Microprocessor controls the display and provides DME tuning code conversion
  • Crystal filter provides added protection against channeling interference for improved selectivity on 50 kHz frequencies
  • Operates on any DC voltage from 11 to 33 volts
  • Models available with diffused or non-diffused display lens,  with 5V lighting and bezel removed for use in a system with a common bezel such as the CNI-5000 (see table below)
  • TSO'd
 
Specifications
 
DIMENSIONS

6.31"W x 1.30"H x 9.75"L

WEIGHT

2.3 lbs

DME CHANNELING

5 wire 2x5 code MHz & kHz lines; 1 wire 50 kHz line; 1 DME common line

ILS ENERGIZE OUTPUT

Ground on ILS channels, open otherwise

FREQUENCY MEMORY

Frequency data stored with no standby power required

FREQUENCY STABILITY

more or less 0.0015%

VOR/LOC SENSITIVITY

2.0uV (hard) max. will provide a half-flag navigation indication. Typical 1.0uV (hard)

VOR/LOC SELECTIVITY:

Typical 6dB at more or less 17kHz, 

80dB at more or less42kHz; 

Minimum 6dB at more or less15kHz, 

60dB at more or less 42kHz

SPURIOUS RESPONSES

Down at least 60dB

IDENT FILTER

15dB minimum tone rejection

NAV ACCURACY

more or less15 deg. max. error/95% probability

AUDIO OUTPUT

50mW at 500 ohms

NAV FREQUENCY RANGE

108.00 to 117.95 MHz

GS CHANNELS

40 (150 kHz spacing)

GS FREQUENCY RANGE

329.15 to 335.00 MHz

GS SELECTIVITY

6dB max at about 25 kHz,

60dB min at about 300 kHz

GS SENSITIVITY

Typically 12uV (hard) for half flag 20uV (hard) max

INDICATOR OUTPUT

No load resistors or wiring changes are necessary for any combination of deviation or alarm flag loads

COURSE DEVIATION RESPONSE

0.6sec max

CENTERING ACCURACY

Less than 10uA under all service conditions

ENVIRONMENTAL CATEGORIES

DO-160/A1D1/A/PS/XXXXXXABABA

TSO

NAV C40a DO-153; LOC C36c, Class D, Cat II DO-131; GS C34c, Class D, Cat II DO-132


PART NUMBER DESCRIPTION
066-1067-00

Diffused display lens, with glideslope receiver/converter

066-1067-01

Diffused display lens, without glideslope receiver/converter

066-1067-02

Non-diffused display lens, with glideslope receiver/converter

066-1067-03

Non-diffused display lens, without glideslope receiver/converter

066-1067-04

Exclusively for the CNI-5000 radio package, NO display lens, 5V lighting, with glideslope receiver/converter

066-1067-05

NO display lens, 5V lighting, without glideslope receiver/converter

066-1067-10

Silver Crown Plus version

 

 

 
KN 53
'